Revisions

Revision

Date

Description

Author

0.01

 

Preliminary Release from original Power Point Slides

Mark Miller

 0.02  Adds logo to first page

Mark Miller

0.03 Adds description of User Access Level changing and editingMark Miller


Table of Contents

ChronScribe™

Main Screen

Command Buttons

TreeView

Status Message Log

Active Alarm Display

OPC Item Status Forms

User Access Levels

See ChronScribe™ Setup and Initialization for details about the User Access Levels, privileges, and limitations.


Upon startup of ChronScribe™, the access level defaults to User. To change or edit the access levels, a menu selection is provided:

 

Change

To change the Access Level:

  1. Select Change from, the Main Form Tools->User Levels menu list.
  2. The dialog below is shown to:
    1. Select the desired level (Admin, Developer, Engineer, Maintenance, or User).
    2. Enter the required password for the level
      1. User level does NOT require a password to enter.
    3. Select a time time limit (in minutes), OR "None"
      1. User level does NOT have a time limit.
      2. Selecting "None" will maintain the same level until changed again or until restart.
    4. Press "Accept" to change the level, OR "Cancel" to cancel the change dialog.


 


After a level change is accepted, the status indicator on the bottom of the Main Form will change to indicate the access level and time remaining (if a time limit was provided).


Edit